This article . is a summary of the Keynote Speech given by Michel Mardiguian and Ulf Nilsson at Electronic Environment Conference in 2016. The intention was to give an overview of what EMC is, how it influences an organisation and to motivate management to implement an EMC culture in their organisation.

This is the 5th article . of our ”EMC awareness” series. At this point, before addressing the coupling path, occuring from (or to) the power mains, it was in order to review a solution that is widely involved in controlling Conducted, Radiated and Crosstalk EMI situations: the use of shielded conductors. The subject is not that simple and requires some insight. This article will explain as clearly as possible for the non-specialist how a cable shield works, how much EMI reduction can be expected, and why the choice of certain cables or installation practices will result in mediocre results.

Radiation Paths and cable-to-cable coupling . This is the 4th article of our EMC awareness series. The former articles, after a broad overview of the EMC subject, reviewed the principal Civilian and Military Norms and test methods, insisting on the legal inforcement of these verifications in Europe, where they are turned into mandatory, « must-comply » laws. Given that source/coupling path/victim concept is the basic approach to EMC, most of the time it is the coupling path between the culprit source and the victim equipment wich is the crux of the problem, hence of its solutions. The 5 essential coupling mechanisms were listed, by which EM Interference take place. Although any equipment can be alternately the victim, or the source, of an EMI problem, we focused on EM susceptibility as being the manifestation that appears first in the designer’s or field engineer’s worries.